Skip to main content

China’s population is about to shrink for the first time since the great famine struck 60 years ago. Here’s what it means for the world

 https://www.bbc.com/future/article/20220531-why-chinas-population-is-shrinking

https://theconversation.com/chinas-population-is-about-to-shrink-for-the-first-time-since-the-great-famine-struck-60-years-ago-heres-what-it-means-for-the-world-176377

China's population is set to get smaller for the first time since the great famine struck 60 years ago. Why? And how will this affect the rest of the world?

 

The world's biggest nation is about to shrink.

China accounts for more than one-sixth of the world's population, yet after four extraordinary decades in which the country’s population has swelled from 660 million to 1.4 billion, its population is on track to turn down this year, for the first time since the great famine of 1959-1961.

According to the latest figures from China's National Bureau of Statistics, China's population grew from 1.41212 billion to just 1.41260 billion in 2021 – a record low increase of just 480,000, a mere fraction of the annual growth of eight million or so common a decade ago.

While a reluctance to have children in the face of strict anti-Covid measures might have contributed to the slowdown in births, it has been coming for years.

China's total fertility rate (births per woman) was 2.6 in the late 1980s – well above the 2.1 needed to replace deaths. It has been between 1.6 and 1.7 since 1994, and slipped to 1.3 in 2020 and just 1.15 in 2021.

By way of comparison, in Australia and the United States the total fertility rate is 1.6 births per woman. In ageing Japan it is 1.3.

This has happened despite China abandoning its one-child policy in 2016 and introducing a three-child policy, backed by tax and other incentives, last year.

You might also like:

Theories differ about why Chinese women remain reluctant to have children in the face of state incentives. One possibility is that the population has become used to small families. Another involves the rising cost of living, while others think it might be to do with the increasing marriage age, which delays births and dampens the desire to have children.

In addition, China has fewer women of child-bearing age than might be expected. Limited to having only one child since 1980, many couples opted for a boy, lifting the sex at birth ratio from 106 boys for every 100 girls (the ratio in most of the rest of the world) to 120, and in some provinces to 130.

Story continues below

After 2021, researchers predict that China's population will decline annually by an average of 1.1% (Credit: Sheldon Cooper/Getty Images)

China's total population grew by a post-famine low of just 0.34 in 1,000 last year. Projections prepared by a team at the Shanghai Academy of Social Sciences have it falling this year – for the first time post-famine – by 0.49 in a thousand.

The turning point has come a decade sooner than expected.

As recently as 2019 the China Academy of Social Sciences expected the population to peak in 2029, at 1.44 billion. The 2019 United Nations Population Prospects report expected the peak later still, in 2031-32, at 1.46 billion.

The Shanghai Academy of Social Sciences team predicts an annual average decline of 1.1% after 2021, pushing China's population down to 587 million in 2100, less than half of what it is today.

The reasonable assumptions behind that prediction are that China's total fertility rate slips from 1.15 to 1.1 between now and 2030, and remains there until 2100.

The rapid decline will have a profound impact on China's economy.

China's working-age population peaked in 2014 and is projected to shrink to less than one-third of that peak by 2100. China's elderly population (aged 65 and above) is expected to continue to climb for most of that time, passing China's working-age population near 2080.

China abandoned its one-child policy in 2016 (Credit: Wang Huabin / Getty Images)

This means that while there are currently 100 working-age people available to support every 20 elderly people, by 2100, 100 working-age Chinese will have to support as many as 120 elderly Chinese.

The annual average decline of 1.73% in China's working-age population sets the scene for much lower economic growth, unless productivity advances rapidly.

Higher labour costs, driven by the rapidly shrinking labour force, are set to push low-margin, labour-intensive manufacturing out of China to labour-abundant countries such as Vietnam, Bangladesh and India.

Already, manufacturing labour costs in China are twice as high as in Vietnam.

At the same time, China will be required to direct more of its productive resources to provision of health, medical and aged-care services to meet the demands of an increasingly elderly population.

Modelling by the Centre of Policy Studies at Victoria University in Australia suggests that without changes to China's pension system, its pension payments will grow five-fold from 4% of GDP in 2020 to 20% of GDP in 2100.

For resource-exporting nations such as Australia, these changes are likely to require a reorientation of exports towards manufacturers outside China. For importers of goods including the United States, the source of goods is set to gradually shift towards new and emerging centres of manufacturing.

Despite forecasts that this will be "the Chinese century", these population projections suggest influence might move elsewhere – including to neighbouring India, whose population is expected to overtake China within this coming decade.

* This is an edited version of an article that originally appeared in The Conversation, and is republished under a Creative Commons licence.

Xiujian Peng works for Centre of Policy Studies, Victoria University. She has received funding from several organisations in the past five years including the Shanghai Academy of Social Sciences, Henan Agricultural University and CHN Energy Economic and Technological Research Institute.

--

Join one million Future fans by liking us on Facebook, or follow us on Twitter or Instagram.

If you liked this story, sign up for the weekly bbc.com features newsletter, called "The Essential List" – a handpicked selection of stories from BBC FutureCultureWorklifeTravel and Reel delivered to your inbox every Friday.

 

 

Comments

Popular posts from this blog

The Difference Between LEGO MINDSTORMS EV3 Home Edition (#31313) and LEGO MINDSTORMS Education EV3 (#45544)

http://robotsquare.com/2013/11/25/difference-between-ev3-home-edition-and-education-ev3/ This article covers the difference between the LEGO MINDSTORMS EV3 Home Edition and LEGO MINDSTORMS Education EV3 products. Other articles in the ‘difference between’ series: * The difference and compatibility between EV3 and NXT ( link ) * The difference between NXT Home Edition and NXT Education products ( link ) One robotics platform, two targets The LEGO MINDSTORMS EV3 robotics platform has been developed for two different target audiences. We have home users (children and hobbyists) and educational users (students and teachers). LEGO has designed a base set for each group, as well as several add on sets. There isn’t a clear line between home users and educational users, though. It’s fine to use the Education set at home, and it’s fine to use the Home Edition set at school. This article aims to clarify the differences between the two product lines so you can decide which...

Let’s ban PowerPoint in lectures – it makes students more stupid and professors more boring

https://theconversation.com/lets-ban-powerpoint-in-lectures-it-makes-students-more-stupid-and-professors-more-boring-36183 Reading bullet points off a screen doesn't teach anyone anything. Author Bent Meier Sørensen Professor in Philosophy and Business at Copenhagen Business School Disclosure Statement Bent Meier Sørensen does not work for, consult to, own shares in or receive funding from any company or organisation that would benefit from this article, and has no relevant affiliations. The Conversation is funded by CSIRO, Melbourne, Monash, RMIT, UTS, UWA, ACU, ANU, ASB, Baker IDI, Canberra, CDU, Curtin, Deakin, ECU, Flinders, Griffith, the Harry Perkins Institute, JCU, La Trobe, Massey, Murdoch, Newcastle, UQ, QUT, SAHMRI, Swinburne, Sydney, UNDA, UNE, UniSA, UNSW, USC, USQ, UTAS, UWS, VU and Wollongong. ...

Logic Analyzer with STM32 Boards

https://sysprogs.com/w/how-we-turned-8-popular-stm32-boards-into-powerful-logic-analyzers/ How We Turned 8 Popular STM32 Boards into Powerful Logic Analyzers March 23, 2017 Ivan Shcherbakov The idea of making a “soft logic analyzer” that will run on top of popular prototyping boards has been crossing my mind since we first got acquainted with the STM32 Discovery and Nucleo boards. The STM32 GPIO is blazingly fast and the built-in DMA controller looks powerful enough to handle high bandwidths. So having that in mind, we spent several months perfecting both software and firmware side and here is what we got in the end. Capturing the signals The main challenge when using a microcontroller like STM32 as a core of a logic analyzer is dealing with sampling irregularities. Unlike FPGA-based analyzers, the microcontroller has to share the same resources to load instructions from memory, read/write th...