Skip to main content

20110413 Temperatures rise at No.4 spent fuel storage pool

Temperatures rise at No.4 spent fuel storage pool

The Tokyo Electric Power Company, or TEPCO, says the water temperature in the spent fuel storage pool at the No. 4 reactor in the crippled Fukushima nuclear plant has risen to about 90 degrees Celsius. It fears the spent fuel rods may be damaged.

TEPCO took the temperature on Tuesday using an extending arm on a special vehicle. It found the temperature was much higher than the normal level of under 40 degrees.

To cool the fuel, TEPCO sprayed 195 tons of water for 6 hours on Wednesday morning.

The company thinks the pool's water level was about 5 meters lower than normal, but 2 meters above the fuel rods.

TEPCO believes the water level is likely to rise by about one meter after the water spraying on Wednesday.

The company also believes temperatures rose after the loss of the reactor's cooling system.

http://www3.nhk.or.jp/daily/english/13_35.html

TEPCO says high levels of radiation at 84 millisieverts per hour were detected above the water surface, where radiation is rarely detected.

The company plans to continue spraying and to analyze radioactive particles in the pool to determine whether the fuel has been damaged.

The storage pool at the No. 4 reactor has housed all the fuel rods that were in operation at the reactor due to massive engineering work there.

TEPCO has sprayed more than 1,800 tons of water on the No. 4 reactor using fire engines and special vehicles since the March 11th crisis. The company feared that fuel rods could cause evaporation of water and put workers at risk of exposure.

University of Tokyo Professor Koji Okamoto says the temperature of 90 degrees indicates that cooling is continuing, although some of the water in the pool may be boiling.

Okamoto says high radiation indicates the possibility of radiation leaks from damaged fuel, and called for the evaluation of water sampling to determine how the situation should be tackled.

The professor says that to prevent further damage to the fuel, it's important to continue cooling the pool while minimizing water leakage from it.

Wednesday, April 13, 2011 21:08 +0900 (JST)

Comments

Popular posts from this blog

The Difference Between LEGO MINDSTORMS EV3 Home Edition (#31313) and LEGO MINDSTORMS Education EV3 (#45544)

http://robotsquare.com/2013/11/25/difference-between-ev3-home-edition-and-education-ev3/ This article covers the difference between the LEGO MINDSTORMS EV3 Home Edition and LEGO MINDSTORMS Education EV3 products. Other articles in the ‘difference between’ series: * The difference and compatibility between EV3 and NXT ( link ) * The difference between NXT Home Edition and NXT Education products ( link ) One robotics platform, two targets The LEGO MINDSTORMS EV3 robotics platform has been developed for two different target audiences. We have home users (children and hobbyists) and educational users (students and teachers). LEGO has designed a base set for each group, as well as several add on sets. There isn’t a clear line between home users and educational users, though. It’s fine to use the Education set at home, and it’s fine to use the Home Edition set at school. This article aims to clarify the differences between the two product lines so you can decide which...

Let’s ban PowerPoint in lectures – it makes students more stupid and professors more boring

https://theconversation.com/lets-ban-powerpoint-in-lectures-it-makes-students-more-stupid-and-professors-more-boring-36183 Reading bullet points off a screen doesn't teach anyone anything. Author Bent Meier Sørensen Professor in Philosophy and Business at Copenhagen Business School Disclosure Statement Bent Meier Sørensen does not work for, consult to, own shares in or receive funding from any company or organisation that would benefit from this article, and has no relevant affiliations. The Conversation is funded by CSIRO, Melbourne, Monash, RMIT, UTS, UWA, ACU, ANU, ASB, Baker IDI, Canberra, CDU, Curtin, Deakin, ECU, Flinders, Griffith, the Harry Perkins Institute, JCU, La Trobe, Massey, Murdoch, Newcastle, UQ, QUT, SAHMRI, Swinburne, Sydney, UNDA, UNE, UniSA, UNSW, USC, USQ, UTAS, UWS, VU and Wollongong. ...

Logic Analyzer with STM32 Boards

https://sysprogs.com/w/how-we-turned-8-popular-stm32-boards-into-powerful-logic-analyzers/ How We Turned 8 Popular STM32 Boards into Powerful Logic Analyzers March 23, 2017 Ivan Shcherbakov The idea of making a “soft logic analyzer” that will run on top of popular prototyping boards has been crossing my mind since we first got acquainted with the STM32 Discovery and Nucleo boards. The STM32 GPIO is blazingly fast and the built-in DMA controller looks powerful enough to handle high bandwidths. So having that in mind, we spent several months perfecting both software and firmware side and here is what we got in the end. Capturing the signals The main challenge when using a microcontroller like STM32 as a core of a logic analyzer is dealing with sampling irregularities. Unlike FPGA-based analyzers, the microcontroller has to share the same resources to load instructions from memory, read/write th...