Skip to main content

East Fukushima shiitake banned

http://search.japantimes.co.jp/cgi-bin/nn20110414a3.html

East Fukushima shiitake banned

By KANAKO TAKAHARA
STAFF WRITER

Prime Minister Naoto Kan on Wednesday banned the shipment of shiitake raised outdoors in eastern Fukushima Prefecture near the crippled nuclear power plant after radioactive substances exceeding government standard were detected.

Subject to the ban are shiitake harvested outdoors on logs in the cities of Date, Soma, Minamisoma, Tamura, Iwaki, and the towns of Shinchi, Kawamata, Namie, Futaba, Okuma, Tomioka, Naraha, Hirono as well as the villages of Iitate, Katsurao and Kawauchi.

"Shiitake mushrooms subject to the shipment ban this time are those raised outdoors and those produced indoors did not exceed the standard," Chief Cabinet Secretary Yukio Edano said. "We will lift the ban when the (level of radioactive substances) stays below the standard in a stable manner."

According to government regulations, a shipment ban will not be lifted unless contamination levels of produce near the Fukushima No. 1 nuclear plant remain below legal limits in three consecutive tests.

A test Sunday found 12,000 becquerels per kg of radioactive iodine and 13,000 becquerels per kg of cesium in shiitake harvested in Iitate. The figure is well above the legal limit of 2,000 becquerels for radioactive iodine and 500 becquerels for cesium.

Shiitake in Iwaki was found to have 3,100 becquerels of radioactive iodine and 890 becquerels of cesium.

Comments

Popular posts from this blog

Logic Analyzer with STM32 Boards

https://sysprogs.com/w/how-we-turned-8-popular-stm32-boards-into-powerful-logic-analyzers/ How We Turned 8 Popular STM32 Boards into Powerful Logic Analyzers March 23, 2017 Ivan Shcherbakov The idea of making a “soft logic analyzer” that will run on top of popular prototyping boards has been crossing my mind since we first got acquainted with the STM32 Discovery and Nucleo boards. The STM32 GPIO is blazingly fast and the built-in DMA controller looks powerful enough to handle high bandwidths. So having that in mind, we spent several months perfecting both software and firmware side and here is what we got in the end. Capturing the signals The main challenge when using a microcontroller like STM32 as a core of a logic analyzer is dealing with sampling irregularities. Unlike FPGA-based analyzers, the microcontroller has to share the same resources to load instructions from memory, read/write th...

The Difference Between LEGO MINDSTORMS EV3 Home Edition (#31313) and LEGO MINDSTORMS Education EV3 (#45544)

http://robotsquare.com/2013/11/25/difference-between-ev3-home-edition-and-education-ev3/ This article covers the difference between the LEGO MINDSTORMS EV3 Home Edition and LEGO MINDSTORMS Education EV3 products. Other articles in the ‘difference between’ series: * The difference and compatibility between EV3 and NXT ( link ) * The difference between NXT Home Edition and NXT Education products ( link ) One robotics platform, two targets The LEGO MINDSTORMS EV3 robotics platform has been developed for two different target audiences. We have home users (children and hobbyists) and educational users (students and teachers). LEGO has designed a base set for each group, as well as several add on sets. There isn’t a clear line between home users and educational users, though. It’s fine to use the Education set at home, and it’s fine to use the Home Edition set at school. This article aims to clarify the differences between the two product lines so you can decide which...

Building a portable GSM BTS using the Nuand bladeRF, Raspberry Pi and YateBTS (The Definitive and Step by Step Guide)

https://blog.strcpy.info/2016/04/21/building-a-portable-gsm-bts-using-bladerf-raspberry-and-yatebts-the-definitive-guide/ Building a portable GSM BTS using the Nuand bladeRF, Raspberry Pi and YateBTS (The Definitive and Step by Step Guide) I was always amazed when I read articles published by some hackers related to GSM technology. H owever , playing with GSM technologies was not cheap until the arrival of Software Defined Radios (SDRs), besides not being something easy to be implemented. A fter reading various articles related to GSM BTS, I noticed that there were a lot of inconsistent and or incomplete information related to the topic. From this, I decided to write this article, detailing and describing step by step the building process of a portable and operational GSM BTS. Before starting with the “hands on”, I would like to thank all the pioneering Hackers and Researchers who started the studies related to previously closed GSM technology. In part...